Author Topic: MSXML Examples  (Read 91705 times)

0 Members and 1 Guest are viewing this topic.

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: removeAttribute Method
« Reply #105 on: September 02, 2011, 11:02:17 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the removeAttribute method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeBook AS IXMLDOMNode
   LOCAL pNamedNodeMap AS IXMLDOMNamedNodeMap
   LOCAL pDOMElement AS IXMLDOMElement

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeBook = pXmlDoc.selectSingleNode("//book")
         pNamedNodeMap = pNodeBook.attributes
         AfxShowMsg STR$(pNamedNodeMap.length)
         pDOMElement = pNodeBook
         pDOMElement.removeAttribute "id"
         AfxShowMsg STR$(pNamedNodeMap.length)
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: removeAttributeNode Method
« Reply #106 on: September 02, 2011, 11:02:53 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the removeAttributeNode method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeBook AS IXMLDOMNode
   LOCAL pNamedNodeMap AS IXMLDOMNamedNodeMap
   LOCAL pNodeId AS IXMLDOMAttribute
   LOCAL pDOMElement AS IXMLDOMElement

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeBook = pXmlDoc.selectSingleNode("//book")
         pNamedNodeMap = pNodeBook.attributes
         AfxShowMsg STR$(pNamedNodeMap.length)
         pDOMElement = pNodeBook
         pNodeId = pDOMElement.getAttributeNode("id")
         pDOMElement.removeAttributeNode pNodeId
         AfxShowMsg STR$(pNamedNodeMap.length)
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: removeChild Method
« Reply #107 on: September 02, 2011, 11:03:43 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the removeChild method.
' The following example creates an IXMLDOMNode object (currNode), removes a child node
' from it, and displays the text of the removed node.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument
   LOCAL pRootNode AS IXMLDOMElement
   LOCAL pCurrNode AS IXMLDOMNode
   LOCAL pChildNode AS IXMLDOMNode
   LOCAL pOldChild AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      IF ISTRUE pXmlDoc.load("books.xml") THEN
         pRootNode = pXmlDoc.documentElement
         pCurrNode = pRootNode.childNodes.item(1)
         pChildNode = pCurrNode.childNodes.item(1)
         pOldChild = pCurrNode.removeChild(pChildNode)
         AfxShowMsg pOldChild.text
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: removeNext Method
« Reply #108 on: September 02, 2011, 11:04:30 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the removeNext method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pSelection AS IXMLDOMSelection
   LOCAL pDOMNode AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pSelection = pXmlDoc.selectNodes("//book")
         DO
            pDOMNode = pSelection.peekNode
            IF ISNOTHING(pDOMNode) THEN EXIT DO
            pDOMNode = pSelection.removeNext
         LOOP
      END IF
      AfxShowMsg pXmlDoc.xml
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: removeQualifiedItem Method
« Reply #109 on: September 02, 2011, 11:05:02 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the removeQualifiedItem method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeBook AS IXMLDOMNode
   LOCAL pDOMNamedNodeMap AS IXMLDOMNamedNodeMap
   LOCAL pNodeId AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeBook = pXmlDoc.selectSingleNode("//book")
         pDOMNamedNodeMap = pNodeBook.attributes
         AfxShowMsg STR$(pDOMNamedNodeMap.length)
         pNodeId = pDOMNamedNodeMap.removeQualifiedItem("id", "")
         AfxShowMsg STR$(pDOMNamedNodeMap.length)
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: replaceChild Method
« Reply #110 on: September 02, 2011, 11:05:36 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the replaceChild method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument
   LOCAL pRootNode AS IXMLDOMElement
   LOCAL pNewElem AS IXMLDOMElement
   LOCAL pChildNodes AS IXMLDOMNodeList
   LOCAL pChildNodes2 AS IXMLDOMNodeList
   LOCAL pItem1 AS IXMLDOMNode
   LOCAL pItem2 AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pRootNode = pXmlDoc.documentElement
         pNewElem = pXmlDoc.createElement("PAGES")
         pChildNodes = pRootNode.childNodes
         pItem1 = pChildNodes.item(1)
         pChildNodes2 = pItem1.childNodes
         pItem2 = pChildNodes2.item(0)
         pItem1.replaceChild pNewElem, pItem2
         AfxShowMsg pItem1.xml
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: replaceData Method
« Reply #111 on: September 02, 2011, 11:06:18 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the replaceData method.
' The following example creates a new IXMLDOMComment object, and then replaces the first
' five characters with a new string.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument
   LOCAL pComment AS IXMLDOMComment

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmLDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pComment = pXmlDoc.createComment("Hello World")
         pComment.replaceData 0, 5, "Goodbye, Cruel"
         AfxShowMsg pComment.xml
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: reset Method (IXMLDOMNamedNodeMap)
« Reply #112 on: September 02, 2011, 11:07:08 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the reset method (IXMLDOMNamedNodeMap).
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeBook AS IXMLDOMNode
   LOCAL pNamedNodeMap AS IXMLDOMNamedNodeMap
   LOCAL pNodeAttribute AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeBook = pXmlDoc.selectSingleNode("//book")
         pNamedNodeMap = pNodeBook.attributes
         pNamedNodeMap.reset
         pNodeAttribute = pNamedNodeMap.nextNode
         AfxShowMsg pNodeAttribute.text
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: reset Method (IXMLDOMNodeList)
« Reply #113 on: September 02, 2011, 11:07:46 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the reset method (IXMLDOMNodeList).
' The following script example creates an IXMLDOMNodeList object and iterates the
' collection using the nextNode method. It then uses the reset method to reset the
' iterator to point before the first node in the list.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeList AS IXMLDOMNodeList
   LOCAL pNode AS IXMLDOMNode
   LOCAL bstrOut AS WSTRING
   LOCAL i AS LONG

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDOc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeList = pXmlDoc.getElementsByTagName("author")
         FOR i = 0 TO pNodeList.length - 1
            bstrOut += pNodeList.nextNode.text & $CRLF
         NEXT
         AfxShowMsg bstrOut
         pNodeList.reset
         AfxShowMsg pNodeList.nextNode.text
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: reset Method (IXSLProcessor)
« Reply #114 on: September 02, 2011, 11:08:18 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the reset method (IXSLProcessor).
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument
   LOCAL pXslt AS IXSLTemplate
   LOCAL pXslDoc AS IXMLDOMDocument
   LOCAL pXslProc AS IXSLProcessor
   LOCAL vRes AS VARIANT

   pXslt = NEWCOM "Msxml2.XSLTemplate.6.0"
   IF ISNOTHING(pXslt) THEN EXIT FUNCTION
   pXslDoc = NEWCOM "Msxml2.FreeThreadedDOMDocument.6.0"
   IF ISNOTHING(pXslDoc) THEN EXIT FUNCTION

   TRY
      pXslDoc.async = %VARIANT_FALSE
      pXslDoc.load "sample.xsl"
      IF pXslDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXslDoc.parseError.reason
      ELSE
         pXslt.putref_stylesheet = pXslDoc
         pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
         pXmlDoc.async = %VARIANT_FALSE
         pXmlDoc.load "books.xml"
         IF pXmlDoc.parseError.errorCode THEN
            AfxShowMsg "You have error " & pXmlDoc.parseError.reason
         ELSE
            pXslProc = pXslt.createProcessor
            pXslProc.input = pXmlDoc
            pXslProc.addParameter "param1", "Hello"
            pXslProc.transform
            vRes = pXslProc.output
            AfxShowMsg VARIANT$$(vRes)
            pXslProc.reset
            vRes = pXslProc.output
            AfxShowMsg VARIANT$$(vRes)
         END IF
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: resolveExternals Property
« Reply #115 on: September 02, 2011, 11:09:14 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the resolveExternals property.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.resolveExternals = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         AfxShowMsg "Parse successful"
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: save Method
« Reply #116 on: September 02, 2011, 11:09:43 AM »
Code: [Select]
' =========================================================================================
' Demonstrates the use of the save method.
' The following example creates a DomDocument object from a string, then saves the
' document to a file in the application folder. If you look at the resulting file you will
' see that, instead of one continuous line of text, after each tag or data string. That is
' because of the $LF constant inserted in the string at the appropriate locations.
' =========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' =========================================================================================
' Main
' =========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.validateOnParse = %VARIANT_FALSE
      pXmlDoc.loadXML _
         "<?xml version='1.0'?>" + $LF + _
         "<doc title='test'>" + $LF + _
         "   <page num='1'>" + $LF + _
         "      <para title='Saved at last'>" + $LF + _
         "          This XML data is finally saved." + $LF + _
         "      </para>" + $LF + _
         "   </page>" + $LF + _
         "   <page num='2'>" + $LF + _
         "      <para>" + $LF + _
         "          This page is intentionally left blank." + $LF + _
         "      </para>" + $LF + _
         "   </page>" + $LF + _
         "</doc>" + $LF
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pXmlDoc.save "saved.xml"
         AfxShowMsg "Saved."
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' =========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: schemas Property
« Reply #117 on: September 02, 2011, 11:10:17 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the schemas property.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pSchemaCache AS IXMLDOMSchemaCollection2

   pXmlDoc = NEWCOM "Msxml2.FreeThreadedDOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION
   pSchemaCache = NEWCOM "Msxml2.XMLSchemaCache.6.0"
   IF ISNOTHING(pSchemaCache) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.validateOnParse = %VARIANT_FALSE
      pSchemaCache.add "x-schema:books", "books.xsd"
      pXmlDoc.putref_schemas = pSchemaCache
      ' The document will load only if a valid schema is attached to the xml file.
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         AfxShowMsg "Done."
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: selectNodes Method
« Reply #118 on: September 02, 2011, 11:10:59 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of the selectNodes method.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument
   LOCAL pNodeList AS IXMLDOMNodeList

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeList = pXmlDoc.documentElement.selectNodes("//book")
         AfxShowMsg STR$(pNodeList.length)
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Code: [Select]
' ========================================================================================
' Demonstrates the use of the selectNodes method.
' The following example creates an IXMLDOMNodeList object containing the nodes specified
' by the expression parameter (for example, all the <xsl:template> nodes in an XSLT style
' sheet). It then displays the number of nodes contained in the node list.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeList AS IXMLDOMNodeList

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.load "hello.xsl"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pXmlDoc.setProperty "SelectionNamespaces", "xmlns:xsl='http://www.w3.org/1999/XSL/Transform'"
         pXmlDOc.setProperty "SelectionLanguage", "XPath"
         pNodeList = pXmlDoc.documentElement.selectNodes("//xsl:template")
         AfxShowMsg FORMAT$(pNodeList.length)
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================

Offline José Roca

  • Administrator
  • Hero Member
  • *****
  • Posts: 2481
  • User-Rate: +204/-0
MSXML: selectSingleNode Method
« Reply #119 on: September 02, 2011, 11:12:00 AM »
Code: [Select]
' ========================================================================================
' Demonstrates the use of setProperty and selectSingleNode.
' ========================================================================================

#DIM ALL
#COMPILE EXE
#INCLUDE ONCE "msxml.inc"
#INCLUDE ONCE "ole2utils.inc"

' ========================================================================================
' Main
' ========================================================================================
FUNCTION PBMAIN

   LOCAL pXmlDoc AS IXMLDOMDocument2
   LOCAL pNodeDescription AS IXMLDOMNode

   pXmlDoc = NEWCOM "Msxml2.DOMDocument.6.0"
   IF ISNOTHING(pXmlDoc) THEN EXIT FUNCTION

   TRY
      pXmlDoc.async = %VARIANT_FALSE
      pXmlDoc.setProperty "SelectionLanguage", "XPath"
      pXmlDoc.load "books.xml"
      IF pXmlDoc.parseError.errorCode THEN
         AfxShowMsg "You have error " & pXmlDoc.parseError.reason
      ELSE
         pNodeDescription = pXmlDoc.selectSingleNode("//description")
         AfxShowMsg pNodeDescription.text
      END IF
   CATCH
      AfxShowMsg OleGetErrorInfo(OBJRESULT)
   END TRY

END FUNCTION
' ========================================================================================